How to Replace the Slideout Fascia in Your RV: A Step-by-Step Guide

Whether you’re looking to replace damaged pieces or simply wish to change the look of your RV, this guide will walk you through the steps to replace the slideout fascia. While RVs may feature various styles of molding and fasteners, the replacement process remains fundamentally the same.

Tools Needed:

• Screw gun with a #2 square bit
• Putty knife or pry bar
• Tape measure
• Side-cutters
• Pliers or nail puller
• Colored wood putty
• Shop towel
• Air compressor
• Hose and nail gun
• Miter saw
• Work surface for moldings and tools

Steps to Replace the Slideout Fascia

1. Remove the Old Molding:
2. Carefully take off the existing molding, labeling each piece with its location and measurements to facilitate reinstallation.
3. Prep the Backer Board:
4. Remove any old brad nails and ensure the backer board surface is clean and smooth, ready for the new fascia.
5. Measure and Cut New Pieces:
6. Measure each new piece of molding. Remember the adage: "measure twice, cut once." Cut each piece to the appropriate length, repeating this step until all pieces are prepared.
7. Nail New Molding in Place:
8. Position and secure the new molding using a nail gun. Ensure it is firmly attached to the backer board.
9. Install Trim Covers:
10. Nail on the trim covers, ensuring they fit snugly against the new molding.
11. Install Corner and Center Block Pieces:
12. Add the corner and center block pieces, securing them in place.
13. Final Touch:
14. Apply colored wood putty to any nail holes and wipe away the excess for a clean finish.

By following these steps to replace the slideout fascia, you can avoid unnecessary visits to the service shop and accomplish an easy installation right at the campground. This DIY approach saves you both time and money—just another way Keystone RV helps you Camp Better!

Disclaimer: The information contained in this article is deemed to be true and accurate at the time of publication. However, due to the evolving nature of our products and services, there may be changes or updates that occur after this article was published. We encourage users to verify the contents and consult with their dealer or Keystone RV for the most current information. If you have any questions or require further clarification, please do not hesitate to contact your dealer or reach out to Keystone RV directly.