How to Replace a Basic Hinge Vent Lid in Your RV: Step-by-Step Guide

We guide you through the process of replacing a basic hinge vent lid in your RV. Whether your vent lid is damaged due to overhanging branches, discolored, brittle, chipped, or cracked, or you simply want to replace it during regular roof maintenance, this guide will provide you with the information you need.

Tools Needed

Before we begin, here are the tools you will need for this job:

• Screw gun
• #2 Phillips bit
• #2 Square bit
• Replacement vent lid

Step-by-Step Instructions

Step 1: Open the Vent Lid

Start by opening the vent lid inside your RV.

Step 2: Remove the Vent Garnish

Using the screw gun with the number two square bit, remove the four screws in the vent garnish. Carefully pull down the garnish and set it aside for later use.

Step 3: Remove the Crank Handle

Next, use the Phillips screwdriver or screw gun to remove the crank handle.

Step 4: Remove the Vent Screen

To remove the vent screen, pinch the two sides or use a standard screwdriver to gently pry it out. If your specific vent has screws holding the screen in place, make sure to remove those screws before proceeding.

Step 5: Detach the Fan Assembly

If your vent includes a fan assembly, gently remove it and let it hang to the side.

Step 6: Remove the Operator Assembly

Remove the two screws holding the operator assembly in place, detach it from the lid, and set it aside for later.

Step 7: Replace the Vent Lid on the Roof

Now it's time to head to the roof. Don’t forget to bring your replacement lid! Simply flip the old lid over until it releases from the hinge, then install the new lid.

Step 8: Reinstall the Components

Once the new lid is in place, return to the inside of your RV to finish up:

1. Reinstall the Operator Assembly: Start by installing the operator assembly.
2. Reattach the Fan Assembly: Next, reinstall the fan assembly.
3. Reinsert the Vent Screen: Place the vent screen back into position.
4. Install the Crank Handle: Finally, attach the crank handle.

Step 9: Test Your Work

After everything is reinstalled, check your work by closing and opening the vent lid to ensure it functions correctly.

Step 10: Complete the Installation

With the vent lid working as designed, finish by reinstalling the garnish.

Disclaimer: The information contained in this article is deemed to be true and accurate at the time of publication. However, due to the evolving nature of our products and services, there may be changes or updates that occur after this article was published. We encourage users to verify the contents and consult with their dealer or Keystone RV for the most current information. If you have any questions or require further clarification, please do not hesitate to contact your dealer or reach out to Keystone RV directly.